VSX 105 Custom Suppressor Configurator

Starting at $179.00

Custom-built just for you! Choose your materials, bore diameters, number of baffles, and more and we’ll whip up a JK 105 VSX to your unique specs.

105 VSX Material Options:

  • LT: 7075 Billet Aluminum
  • HD: 17-4 Stainless Steel

105 VSX Bore Diameters:

  • .22 cal
  • 9mm

VSX Product Configurator

This is your chance to build a big ol’ suppressor with assorted types of baffles so you can use it in different ways on as many of your firearms as possible!
Materials
End Caps
Mounts
Specs
  • LT (7075 billet aluminum):
    • The lightest option for building a featherweight suppressor
    • Handles high pressure, but susceptible to wear from high temperatures and abrasion
    • On rimfire and pistol caliber rifles and pistols, LT baffles can handle anything you can throw at them outside of sustained full-auto fire
    • On centerfire rifles, LT baffles are best suited to sporting use, which means light-duty firing schedules of 10 rounds or fewer followed by cool-down periods back to ambient temperature. Perfect for a lightweight hunting setup!
    • Type III Hardcoat Anodize finish
  • HD (17-4 stainless steel):
    • Extremely strong and durable, even at very high temperatures
    • Best option for heavy-duty firing schedules
    • Best option for the blast baffle (the very first baffle) on short barreled, centerfire rifles
    • C Series high-temp Cerakote finish

Tips for mixing and matching baffle materials:

  • The blast baffle – the very first baffle in front of the muzzle – will always receive the most abuse. On centerfire rifles in particular, it is hit with high-temperature, supersonic gas and abrasive debris every time a shot is fired. Shorter barrels increase the pressure, temperature, and amount of debris vs. longer barrels. You can mitigate blast baffle wear by:
    • Spec a more durable material for your blast baffle
    • Cycle which baffle is in the blast baffle position (e.g. if you have a suppressor made with 6 LT baffles, every X number of rounds you can remove the last baffle and install it as the first baffle)
  • Ultimately, you’ll look to configure the lightest, shortest setup possible that still provides the necessary level of durability and sound suppression for your firearm and your intended use.
Matching your end cap bore size to the caliber you’re shooting will provide the best possible sound suppression performance. Smaller calibers can be shot through larger end caps (e.g. 223/5.56 is fine through a .30 cal or larger end cap), but larger calibers CANNOT be shot through smaller end caps.

Most suppressor-ready firearms feature a threaded barrel. If you own a pistol or a shotgun that you’d like to suppress, but it doesn’t have a threaded barrel, we sell threaded pistol barrels and offer shotgun barrel threading.

If you’re unfamiliar with threaded barrels and the various commonly-found thread sizes, this article on Silencer Shop’s website is a good read.

The most cost-effective method of attaching a suppressor to a firearm with a threaded barrel is with a direct thread, fixed mount. Match the thread size of the mount to the thread size on your barrel. One mount can be easily moved across multiple firearms. For example, if you own 300 Blackout, 308 Winchester, and 6.5 Creedmoor rifles you can install a single, 5/8×24 direct thread mount into your suppressor and move the suppressor (keeping the mount installed in it) between all of those rifles.

A faster method is to install a Quick Attach muzzle device onto each firearm you’d like to suppress. For instance, install a JK War Eagle or Bald Eagle onto each of your rifles and a JK QA Taper Mount into your suppressor. Now, with only a couple rotations of your suppressor, you can rapidly and securely swap it from gun to gun.

On recoil-operated pistols (most centerfire, semi-automatic pistols that do not feature a fixed barrel, which is the vast majority of them), a suppressor weighing over approximately 4.5 ounces will require a pistol booster for proper operation. For this use you’ll want a JK Pistol Booster with a piston that matches the thread size of your barrel (e.g. most 9mm barrels are threaded 1/2×28, and most 45 ACP barrels are threaded 0.578×28).

The following information will help you visualize what you’re building and what your silencer will look like in each of its possible configurations:

Cup Profile:

  • Rifle: 60 Degree. Recommended for high-pressure rifle calibers.
  • Pistol: Radial. Recommended for low pressure (generally straight-walled cartridges).

Material Coatings:

  • LT – Type 3 Hard Anodize
  • HD – Armor Black C-192 Cerakote
  • PRO – Armor Black C-192 Cerakote

Individual component specs:

  • 155 Series:
    • LT Tube: 1.8oz. 1.55″ OD. Length 2.5″.
    • HD Tube: 3.7oz. 1.55″ OD. Length 2.5″.
    • PRO Tube: 2.2oz. 1.55″ OD. Length 2.5″.
    • LT Rifle Baffle: 1oz. Adds .650″ to OAL.
    • HD Rifle Baffle: 2.3oz. Adds .650″ to OAL.
    • PRO Rifle Baffle: 1.5oz. Adds .650″ to OAL.
    • LT Pistol Baffle: 1oz. Adds .650″ to OAL.
    • PRO Pistol Baffle: 1.5oz. Adds .650″ to OAL.
    • LT Extension Tube / Tone Tuner: 0.7 oz. Adds .650″ to OAL.
    • HD Extension Tube / Tone Tuner: 2.4oz. Adds .650″ to OAL.
    • PRO Extension Tube / Tone Tuner: 1.3oz. Adds .650″ to OAL.
    • LT Taper Mount: 1.1oz. Adds .600″ to OAL
    • PRO Taper Mount 1.3oz. Adds .600″ to OAL
    • Direct Thread Mount: 2.1oz.

CCX/RFX hybrid build. Two suppressors, one stamp!

  • LT Main Tube
  • LT Tone Tuner
  • .22 cal HD Rimfire baffle
  • (5x) .22 cal LT Rimfire baffles
  • (5x) 9mm LT Pistol baffles
  • .22 cal LT End Cap
  • 9mm LT End Cap
  • 1/2x28 CCX Pistol Thread Mount
  • 5/8x24 CCX Lever Gun Thread Mount (if you own a lever action gun threaded 5/8x24 in a CCX-compatible caliber such as .38/.357)

With the CCX/RFX build you can suppress all of your rimfire rifles and pistols plus anything in 5.7x28mm. It’s also a Mission Configurable 9mm pistol, PCC, and lever gun suppressor that’s capable of being run in a full configuration for training on the shooting range and a short configuration for concealed carry. It’s so lightweight that it doesn’t need a booster on the vast majority of 9mm pistols!

Short, minimalist rimfire rifle build:

  • LT Main Tube
  • (4x) .22 cal LT Rimfire baffles
  • .22 cal LT End Cap
  • 1/2x28 RFX Rifle Thread Mount

A 22 LR rifle or carbine with a 16-inch or longer barrel doesn’t leave a lot of work for the suppressor to do, so you don’t need many baffles to achieve impressively quiet performance! With the minimalist rimfire rifle build length, weight, and cost are reduced to the lowest levels possible, while still achieving Hollywood quiet plinking performance from rifle-length barrels.

CCX long for centerfire lever action rifles:

  • LT Main Tube
  • LT Tone Tuner
  • (8x) 9mm LT Pistol baffles
  • 9mm LT End Cap
  • 1/2x28 RFX Thread Mount and/or 5/8x24 CCX Lever Gun Thread Mount depending on your rifle’s thread size

Designed for use on lever action rifles and carbines chambered in .38/.357 caliber and smaller, the CCX long build optimizes suppression performance on revolver/lever gun cartridges with its Tone Tuner and eight baffles.

Age Verification

DUE TO INCREASED STATE LEGISLATION AROUND FIREARMS, YOU MUST BE 21 TO ACCESS OUR SITE.

ARE YOU AT LEAST 21 YEARS OLD?

Example Build 1
Example Build 2
  • 155 Series
  • HD base tube
  • Baffles:
    • 1x .30 cal HD Rifle
    • 4x .30 cal PRO Rifle
    • 5x 9mm LT Pistol
  • LT Extension Tube
  • End Caps:
    • 1x .22 cal LT Flash Hider
    • 1x .30 cal LT Compensator
    • 1x 9mm LT Flash Reducer
  • Mounts:
    • 1x PRO QA Taper Mount
    • 1x 1/2x28 Thread Mount
    • 1x 5/8x24 Thread Mount
    • 2x .22 cal Bald Eagle
    • 2x .30 cal Bald Eagle
    • 1x 9mm Bald Eagle
    • 1x 1/2x28 Pistol Booster

With this build I can suppress every .30 caliber and smaller rifle and every 9mm and smaller pistol in my collection. Whether I’m running my AR-15 or AR-10 hard – even full-auto – or I’m on a spot-and-stalk hunt with a lightweight bolt-action rifle, or I’m plinking or varmint hunting with a rimfire rifle, or I’m shooting pistols and pistol caliber carbines in 9mm or smaller, this one suppressor can be configured so it’s ideally suited for each and every one of those things and more.

Heck, if I also owned a 45 ACP pistol and/or a 458 SOCOM rifle or a .45 cal lever action I could add 5x .45 cal LT and/or PRO Pistol baffles and have those guns covered, too!

  • 105 Series
  • LT base tube
  • Baffles:
    • 1x .22 cal HD Rimfire
    • 6x .22 cal LT Rimfire
    • 6x 9mm LT Pistol
    • LT Extension Tube
  • End Caps:
    • 1x .22 cal LT Flash Reducer
    • 1x 9mm LT Flash Reducer
  • Mounts:
    • 1x 1/2x28 Thread Mount

With this build I can suppress all of my rimfire rifles and pistols plus anything in 5.7x28mm. It’s also a Mission Configurable 9mm pistol and PCC suppressor that’s capable of being run in a full configuration for training on the shooting range and a short configuration for concealed carry. It’s so lightweight that it doesn’t need a booster!