JK HD War Eagle Comp / Flash Hider

$139.00

A true triple-use muzzle device, the JK HD War Eagle is a compensator, a flash hider, and a QA mount for our suppressors! Thanks to its symmetrical design there’s no need to time the War Eagle, making installation fast and easy.

SKU: N/A Categories: ,
  • Specs
  • Features

Features

A true triple-use muzzle device, the JK HD War Eagle is a compensator, a flash hider, and a QA mount for our suppressors! 

Thanks to its symmetrical design there’s no need to time the War Eagle, making installation fast and easy.

 

 

 

Machined from heat-treated black nitrided 17-4 stainless steel, the War Eagle will serve a lifetime of reducing recoil and flash while acting as a solid hub for your JK Quick Attach Taper Mount-equipped suppressor. As an added bonus, the tough War Eagle acts as an initial blast baffle inside of your suppressor, taking some of the abuse that’s otherwise directed at your first suppressor baffle and extending its service life.

The War Eagle features wrench flats front and rear for simple installation and removal and is available in a variety of thread sizes and bore sizes to fit all of your rifles.

INCLUDES:

(1) JK HD War Eagle Comp / Flash Hider

*Recommended torque spec 35ft/lbs

Specs

Spec NameSpec Value
Color: Black
Coating: Black Nitrided
Material: Heat Treated 17-4 Stainless Steel
Weight: 3.0 oz
OAL: 1.9"

UNLIMITED, UNCONDITIONAL, LIFETIME WARRANTY

Pride and quality workmanship goes into all of our American-made, JK products, and we stand behind them! WE GUARANTEE OUR PRODUCTS
FOR LIFE!

Great fitment

April 29, 2024

The fitment with the new design with taper mount is amazing! Mounted it on a mk18 upper and you can barely see a gap between the handguard and taper mount. Also install was super easy compared to most muzzle device, no shimming require. Rocksett and torque down with a 13/16 socket

Linh Nguyen (verified owner)

Age Verification

DUE TO INCREASED STATE LEGISLATION AROUND FIREARMS, YOU MUST BE 18 TO ACCESS OUR SITE.

ARE YOU AT LEAST 18 YEARS OLD?

Example Build 1
Example Build 2
  • 155 Series
  • HD base tube
  • Baffles:
    • 1x .30 cal HD Rifle
    • 4x .30 cal PRO Rifle
    • 5x 9mm LT Pistol
  • LT Extension Tube
  • End Caps:
    • 1x .22 cal LT Flash Hider
    • 1x .30 cal LT Compensator
    • 1x 9mm LT Flash Reducer
  • Mounts:
    • 1x PRO QA Taper Mount
    • 1x 1/2x28 Thread Mount
    • 1x 5/8x24 Thread Mount
    • 2x .22 cal Bald Eagle
    • 2x .30 cal Bald Eagle
    • 1x 9mm Bald Eagle
    • 1x 1/2x28 Pistol Booster

With this build I can suppress every .30 caliber and smaller rifle and every 9mm and smaller pistol in my collection. Whether I’m running my AR-15 or AR-10 hard – even full-auto – or I’m on a spot-and-stalk hunt with a lightweight bolt-action rifle, or I’m plinking or varmint hunting with a rimfire rifle, or I’m shooting pistols and pistol caliber carbines in 9mm or smaller, this one suppressor can be configured so it’s ideally suited for each and every one of those things and more.

Heck, if I also owned a 45 ACP pistol and/or a 458 SOCOM rifle or a .45 cal lever action I could add 5x .45 cal LT and/or PRO Pistol baffles and have those guns covered, too!

  • 105 Series
  • LT base tube
  • Baffles:
    • 1x .22 cal HD Rimfire
    • 6x .22 cal LT Rimfire
    • 6x 9mm LT Pistol
    • LT Extension Tube
  • End Caps:
    • 1x .22 cal LT Flash Reducer
    • 1x 9mm LT Flash Reducer
  • Mounts:
    • 1x 1/2x28 Thread Mount

With this build I can suppress all of my rimfire rifles and pistols plus anything in 5.7x28mm. It’s also a Mission Configurable 9mm pistol and PCC suppressor that’s capable of being run in a full configuration for training on the shooting range and a short configuration for concealed carry. It’s so lightweight that it doesn’t need a booster!