JK HD Minimalist

$69.00

If you’re looking for the lightest, smallest, most cost-effective muzzle device to allow quick attach functionality across all of your ASR-compatible silencers, then look no further than the new JK HD Minimalist! This nitrided 17-4 stainless steel muzzle device weighs just 2.2 ounces and is a scant 1.0 inch long. It provides secure, rapid attachment and removal of your JK 155 suppressors and any other suppressor with an ASR-compatible mount such as one of our Taper Mounts.

JK HD Minimalist is available in 1/2-28 (For use with .22 Cal & 9mm) and 5/8×24 (For use with .30cal and .45cal).

SKU: N/A Categories: ,
  • Specs
  • Features

Features

If you’re looking for the lightest, smallest, most cost-effective muzzle device to allow quick attach functionality across all of your ASR-compatible silencers, then look no further than the new JK HD Minimalist! This nitrided 17-4 stainless steel muzzle device weighs just 2.2 ounces and is a scant 1.0 inch long. It provides secure, rapid attachment and removal of your JK 155 suppressors and any other suppressor with an ASR-compatible mount such as one of our Taper Mounts.

 

Precision machined from heat-treated and black nitrided 17-4 stainless steel, the JK HD Minimalist is available in 1/2-28 (For use with .22 Cal & 9mm) and 5/8×24 (For use with .30cal and .45cal).

 

Wrench flats at the front as well as on the rear ensure easy installation and removal of the JK HD Minimalist. A front taper protects the threads from carbon fouling and provides for a secure, precise mating surface for your silencer.

The JK HD Minimalist muzzle device is everything you need and nothing you don’t! It’s the perfect choice for outfitting a safe full of rifles to allow for rapidly sharing a suppressor(s) across multiple guns.

*Recommended torque spec 35ft/lbs

Specs

Spec NameSpec Value
Material: Heat Treated 17-4 Stainless Steel
Coating: Black Nitride
Weight: 2.2 oz
OAL: 1"

UNLIMITED, UNCONDITIONAL, LIFETIME WARRANTY

Pride and quality workmanship goes into all of our American-made, JK products, and we stand behind them! WE GUARANTEE OUR PRODUCTS
FOR LIFE!

Reviews

Be the first to review “JK HD Minimalist”

Your email address will not be published. Required fields are marked *

CCX/RFX hybrid build. Two suppressors, one stamp!

  • LT Main Tube
  • LT Tone Tuner
  • .22 cal HD Rimfire baffle
  • (5x) .22 cal LT Rimfire baffles
  • (5x) 9mm LT Pistol baffles
  • .22 cal LT End Cap
  • 9mm LT End Cap
  • 1/2x28 CCX Pistol Thread Mount
  • 5/8x24 CCX Lever Gun Thread Mount (if you own a lever action gun threaded 5/8x24 in a CCX-compatible caliber such as .38/.357)

With the CCX/RFX build you can suppress all of your rimfire rifles and pistols plus anything in 5.7x28mm. It’s also a Mission Configurable 9mm pistol, PCC, and lever gun suppressor that’s capable of being run in a full configuration for training on the shooting range and a short configuration for concealed carry. It’s so lightweight that it doesn’t need a booster on the vast majority of 9mm pistols!

Short, minimalist rimfire rifle build:

  • LT Main Tube
  • (4x) .22 cal LT Rimfire baffles
  • .22 cal LT End Cap
  • 1/2x28 RFX Rifle Thread Mount

A 22 LR rifle or carbine with a 16-inch or longer barrel doesn’t leave a lot of work for the suppressor to do, so you don’t need many baffles to achieve impressively quiet performance! With the minimalist rimfire rifle build length, weight, and cost are reduced to the lowest levels possible, while still achieving Hollywood quiet plinking performance from rifle-length barrels.

CCX long for centerfire lever action rifles:

  • LT Main Tube
  • LT Tone Tuner
  • (8x) 9mm LT Pistol baffles
  • 9mm LT End Cap
  • 1/2x28 RFX Thread Mount and/or 5/8x24 CCX Lever Gun Thread Mount depending on your rifle’s thread size

Designed for use on lever action rifles and carbines chambered in .38/.357 caliber and smaller, the CCX long build optimizes suppression performance on revolver/lever gun cartridges with its Tone Tuner and eight baffles.

Age Verification

DUE TO INCREASED STATE LEGISLATION AROUND FIREARMS, YOU MUST BE 21 TO ACCESS OUR SITE.

ARE YOU AT LEAST 21 YEARS OLD?

Example Build 1
Example Build 2
  • 155 Series
  • HD base tube
  • Baffles:
    • 1x .30 cal HD Rifle
    • 4x .30 cal PRO Rifle
    • 5x 9mm LT Pistol
  • LT Extension Tube
  • End Caps:
    • 1x .22 cal LT Flash Hider
    • 1x .30 cal LT Compensator
    • 1x 9mm LT Flash Reducer
  • Mounts:
    • 1x PRO QA Taper Mount
    • 1x 1/2x28 Thread Mount
    • 1x 5/8x24 Thread Mount
    • 2x .22 cal Bald Eagle
    • 2x .30 cal Bald Eagle
    • 1x 9mm Bald Eagle
    • 1x 1/2x28 Pistol Booster

With this build I can suppress every .30 caliber and smaller rifle and every 9mm and smaller pistol in my collection. Whether I’m running my AR-15 or AR-10 hard – even full-auto – or I’m on a spot-and-stalk hunt with a lightweight bolt-action rifle, or I’m plinking or varmint hunting with a rimfire rifle, or I’m shooting pistols and pistol caliber carbines in 9mm or smaller, this one suppressor can be configured so it’s ideally suited for each and every one of those things and more.

Heck, if I also owned a 45 ACP pistol and/or a 458 SOCOM rifle or a .45 cal lever action I could add 5x .45 cal LT and/or PRO Pistol baffles and have those guns covered, too!

  • 105 Series
  • LT base tube
  • Baffles:
    • 1x .22 cal HD Rimfire
    • 6x .22 cal LT Rimfire
    • 6x 9mm LT Pistol
    • LT Extension Tube
  • End Caps:
    • 1x .22 cal LT Flash Reducer
    • 1x 9mm LT Flash Reducer
  • Mounts:
    • 1x 1/2x28 Thread Mount

With this build I can suppress all of my rimfire rifles and pistols plus anything in 5.7x28mm. It’s also a Mission Configurable 9mm pistol and PCC suppressor that’s capable of being run in a full configuration for training on the shooting range and a short configuration for concealed carry. It’s so lightweight that it doesn’t need a booster!