JK Bald Eagle 12ga Choke Replacement Muzzle Device (CRMD)


JK BALD EAGLE 12GA is a Choke Replacement Muzzle Device (CRMD) it can be used as a stand-alone muzzle device or along with our 195 series compensators and suppressors.

*The choke system for controlling shot pattern is located in the end cap of both the VERSAX12 and SGX12. They ship with an improved cylinder choke and additional chokes are available for purchase. HERE

SKU: N/A Category:
  • Specs
  • Features


The JK BALD EAGLE 12GA Choke Replacement Muzzle Device (CRMD) installs in place of your shotgun’s standard choke tube. Designed as a gas-sealing QD mount for our JK 195 series of 12 gauge shotgun suppressors and our 195 LT SUPER Comp, the CRMD can also be used as a stand-along muzzle device.

The BALD EAGLE 12GA CRMD is a cylinder bore choke. As the choke system for controlling shot pattern restriction is located in the end cap of our 195 suppressors, the CRMD can remain installed while the Choke Cap is easily swapped in seconds with no specialized tools required. Choke Caps in different levels of shot pattern restriction are available HERE.

* If you are not sure what style of choke your shotgun uses please see the CRMD chart. You may need to contact your firearms manufacturer to confirm the choke style. If you are unable to confirm the choke style with the firearm manufacturer we may need you to mail us a choke for confirmation.

* Install with Blue Loctite.


Spec NameSpec Value
Material: 17-4 Stainless 17-4 Stainless
Finish: Black Nitride
Remington Choke OAL: 3.4" Internal Choke Length 2.08" Thread: 13/16 x 32 tpi
Browning Invector Plus OAL: 3.7" Internal Choke Length 2.38" Thread: 53/64 x 32 tpi
Beretta Optima HP OAL: 4.1" Internal Choke Length 2.75" Thread: .78 - 24 tpi
Benelli Crio Plus OAL: 4.1" Internal Choke Length 2.75" Thread: 20.8 x 1mm
Beretta / Benelli Mobil OAL: 3.6" Internal Choke Length 2.24" Thread: 20.8 x 1mm
Win - Browning Invector - Mossberg 500 (Accu Choke) OAL: 2.9" Internal Choke Length 1.48" Thread: 13/16 x 32 tpi


Pride and quality workmanship goes into all of our American-made, JK products, and we stand behind them! WE GUARANTEE OUR PRODUCTS

There are no reviews yet. Be the first one to write one.

Age Verification



Example Build 1
Example Build 2
  • 155 Series
  • HD base tube
  • Baffles:
    • 1x .30 cal HD Rifle
    • 4x .30 cal PRO Rifle
    • 5x 9mm LT Pistol
  • LT Extension Tube
  • End Caps:
    • 1x .22 cal LT Flash Hider
    • 1x .30 cal LT Compensator
    • 1x 9mm LT Flash Reducer
  • Mounts:
    • 1x PRO QA Taper Mount
    • 1x 1/2x28 Thread Mount
    • 1x 5/8x24 Thread Mount
    • 2x .22 cal Bald Eagle
    • 2x .30 cal Bald Eagle
    • 1x 9mm Bald Eagle
    • 1x 1/2x28 Pistol Booster

With this build I can suppress every .30 caliber and smaller rifle and every 9mm and smaller pistol in my collection. Whether I’m running my AR-15 or AR-10 hard – even full-auto – or I’m on a spot-and-stalk hunt with a lightweight bolt-action rifle, or I’m plinking or varmint hunting with a rimfire rifle, or I’m shooting pistols and pistol caliber carbines in 9mm or smaller, this one suppressor can be configured so it’s ideally suited for each and every one of those things and more.

Heck, if I also owned a 45 ACP pistol and/or a 458 SOCOM rifle or a .45 cal lever action I could add 5x .45 cal LT and/or PRO Pistol baffles and have those guns covered, too!

  • 105 Series
  • LT base tube
  • Baffles:
    • 1x .22 cal HD Rimfire
    • 6x .22 cal LT Rimfire
    • 6x 9mm LT Pistol
    • LT Extension Tube
  • End Caps:
    • 1x .22 cal LT Flash Reducer
    • 1x 9mm LT Flash Reducer
  • Mounts:
    • 1x 1/2x28 Thread Mount

With this build I can suppress all of my rimfire rifles and pistols plus anything in 5.7x28mm. It’s also a Mission Configurable 9mm pistol and PCC suppressor that’s capable of being run in a full configuration for training on the shooting range and a short configuration for concealed carry. It’s so lightweight that it doesn’t need a booster!