JK 195 VERSAX 12GA
$599.00 – $659.00
Hands-down the best 12 gauge suppressor ever developed! From tactical operations to sporting clays to bird hunting, there has never been a more capable shotgun suppressor than the JK 195 VERSAX 12GA.
MISSION CONFIGURABLE
Fully modular length, suppression level, choke system, and mounting solutions to match your firearm and your mission. Convenient cleaning and maintenance without specialized tools.
LIGHTWEIGHT
Just 9.3 ounces in its longest configuration, the VERSAX 12GA swings fast and points naturally.
ADAPTABLE
Configurable from 3.375 inches to 8 inches long so you can choose the balance of length, weight, and sound suppression that’s right for your gun and your mission.
Swappable choke caps for controlling shot pattern. Exchange end caps in seconds, without specialized tools, to switch between various levels of shot pattern restriction. The VERSAX 12GA’s choke caps make it the first and only shotgun suppressor on the market that correctly and variably shapes your shot pattern to suit your use!
COMPATIBLE
Our Choke Replacement Muzzle Device (CMDR), the JK Bald Eagle 12GA, is available in most common choke tube thread patterns and allows for the quick attachment and removal of your VERSAX 12GA suppressor.
The Bald Eagle 12GA is a cylinder choke and is designed to remain installed in your shotguns. Controlling shot pattern is as simple as quickly and easily swapping out the VERSAX 12GA suppressor’s choke cap.
REFINED
There’s quiet on a dB meter, and then there’s quiet to the ear. With JK Armament’s Tone Technology you get both! Tone Technology refines the 195 VERSAX’s sound signature for a solid, deep tone that’s more pleasing to the ear.
DESIGN NOTES:
JK set out to resolve the glaring issue with every previous shotgun suppressor on the market: improper shot cup management. While other designs disturb and damage the shotshell wad as it passes through the suppressor, our patented baffle design allows the wad to pass through smoothly and even re-shapes and supports it along the way. This means no plastic shavings inside of your silencer or blowing back into your shotgun, it means consistent shot patterns, and it even means increased shot velocity.
But we didn’t stop there! In just seconds and without specialized tools, the VERSAX 12GA’s front choke cap can be swapped out to switch between various levels of shot pattern constriction. A cylinder bore choke cap is included, with other constriction level choke caps available HERE. The VERSAX 12GA is the first and only shotgun suppressor on the market that correctly and variably shapes your shot pattern to suit your use! It’s the only shotgun suppressor that won’t hold you back when a tight shot pattern is required, such as with skeet, trap, and bird hunting.
Fully Mission Configurable, the 195 VERSAX is 3.375 inches long and weighs just 4.3 ounces in its shortest configuration. In its full configuration with all four baffle assemblies, it’s 8 inches long and weighs only 9.3 ounces. By simply adding or removing baffles – no specialized tools are needed! – the user is able to choose the length, weight, and sound suppression that’s right for the firearm and the mission.
Tone Technology and a 1.95-inch diameter result in a clean, deep tone. The JK 195 VERSAX was also designed with the option to be run “wet,” and ships pre-packed with the recommended amount of petroleum jelly inside its baffles. Take note of how much we’ve added so you can re-apply later if you want to squeeze every bit of suppression performance out of the 195 VERSAX.
A 12 Gauge shotgun suppressor, the JK 195 VERSAX is rated for birdshot (both steel and lead), buckshot, and slugs. We recommend using shotshells with a cup style wad. We don’t yet recommend using high-density shot such as Hevi-Shot, Federal TSS, or similar tungsten or bismuth loads until we complete our long-term evaluation.
INCLUDES:
(1) JK 195 LT Taper Mount
(1) JK 195 LT Tube
(4) JK 195 LT SGX Baffle Assembly
(1) JK 195 LT Cylinder Choke Flash Reducer Choke Cap
| BARREL AND CALIBER RATINGS | |
| CALIBER | TYPE |
| 12 Gauge | Birdshot (steel and lead), buckshot, and slugs |
| Min Barrel Length | 14.5” |
| * We recommend using shotshells with a shot cup style wad
* High-density shot such as Hevi-Shot, Federal TSS, or similar tungsten or bismuth offerings are under long-term evaluation and are presently not recommended |
|
| SPECS | |
| Length | 3.375” to 8” |
| Length No Mount | 2.875” to 7.75” |
| Diameter | 1.95” |
| Weight | 4.3 oz to 9.3 oz |
| Material | 7075 Billet Aluminum |
| Color | Black |
| Finish | Type 3 Hard Anodized |
JK 195 VERSAX 12
Length: 3.75” to 8.25” (Configurable)
Length No Mount: 2.92” to 7.75” (Configurable)
W:4.3oz to 9.3oz (Configurable)
Color: Black
Material: 7075 Billet Aluminum
Coating: Type 3 Hard Anodize