JK 195 SBSX BREACHER 12GA SILENCER

JK 195 SBSX BREACHER 12GA

$1,099.00

Available on backorder

  • Add A Choke Replacement Muzzle Device

    Add A Over Barrel Muzzle Device

    Add A Choke End Cap

The best 12 GA suppressor ever developed! High Flow design developed with LE/MIL breaching and full-auto use in mind Variable shot pattern constriction Ready for hard use on short barrels

The tactical MIL/LEO variant of the best 12 gauge suppressor ever developed! Designed with breaching, short barrels, and full-auto use in mind, the JK 195 SBSX BREACHER 12GA is ready to operate.

SKU: JK-195SBSX12 Categories: , ,
  • Specs
  • Features

Features

JK Armament SBSX shotgun silencer

There’s quiet on a dB meter, and then there’s quiet to the ear. With JK Armament’s Tone Technology, you get both! Tone Technology and a high-flow design refine the 195 SBSX BREACHER’s sound signature for a solid, deep tone that’s more pleasing to the ear.

Designed with military and law enforcement use in mind, the JK 195 SBSX BREACHER 12GA is a high-flow variant of our 195 SGX 12GA and 195 VERSAX 12GA shotgun silencers. It features ported baffle assemblies for improved gas management plus a high flow, flash hider choke cap designed for MIL/LEO breaching use. Like the SGX and VERSAX, the choke cap can be swapped in seconds for any of our shot pattern constriction choke caps, available HERE

 

JK Armament SBSX shotgun silencer

Fully Mission Configurable, the 195 SBSX BREACHER is 3.375 inches long and weighs just 4.6 ounces in its shortest configuration. In its full configuration with all five high-flow baffle assemblies, it’s 10 inches long and weighs only 15.4 ounces. By simply adding or removing baffles – no specialized tools are needed! – the operator is able to choose the length, weight, and sound suppression that’s right for the firearm and the mission.

 

JK Armament SBSX shotgun silencer

Tone Technology and a 1.95-inch diameter result in a clean, deep tone. The JK 195 SBSX BREACHER was also designed with the option to be run “wet,” and ships pre-packed with the recommended amount of petroleum jelly inside its baffles. Take note of how much we’ve added so you can re-apply later if you want to squeeze every bit of suppression performance out of the 195 SBSX BREACHER.

 

A 12 Gauge, high flow shotgun suppressor geared toward military and law enforcement use, the JK 195 SBSX BREACHER is rated for birdshot (both steel and lead), buckshot, and slugs from short barrels, even on fully-automatic shotguns. We recommend using shotshells with a cup style wad. We don’t yet recommend using high-density shot such as Hevi-Shot, Federal TSS, or similar tungsten or bismuth loads until we complete our long-term evaluation. 

JK Armament SBSX shotgun silencer

INCLUDES:

JK 195 SBSX 12

(1) JK 195 LT Taper Mount (FIXED)

(1) JK 195 LT Tube

(2) JK 195 LT TB SBSX Baffle Assembly

(3) JK 195 LT HF SBSX Baffle Assembly

(1) JK 195 LT Cylinder Bore HIGH FLOW – FLASH HIDER – BREACHER Choke Cap

Specs

UNLIMITED, UNCONDITIONAL, LIFETIME WARRANTY

Pride and quality workmanship goes into all of our American-made, JK products, and we stand behind them! WE GUARANTEE OUR PRODUCTS
FOR LIFE!

Reviews

Be the first to review “JK 195 SBSX BREACHER 12GA”

Your email address will not be published. Required fields are marked *

Age Verification

DUE TO INCREASED STATE LEGISLATION AROUND FIREARMS, YOU MUST BE 18 TO ACCESS OUR SITE.

ARE YOU AT LEAST 18 YEARS OLD?

Example Build 1
Example Build 2
  • 155 Series
  • HD base tube
  • Baffles:
    • 1x .30 cal HD Rifle
    • 4x .30 cal PRO Rifle
    • 5x 9mm LT Pistol
  • LT Extension Tube
  • End Caps:
    • 1x .22 cal LT Flash Hider
    • 1x .30 cal LT Compensator
    • 1x 9mm LT Flash Reducer
  • Mounts:
    • 1x PRO QA Taper Mount
    • 1x 1/2x28 Thread Mount
    • 1x 5/8x24 Thread Mount
    • 2x .22 cal Bald Eagle
    • 2x .30 cal Bald Eagle
    • 1x 9mm Bald Eagle
    • 1x 1/2x28 Pistol Booster

With this build I can suppress every .30 caliber and smaller rifle and every 9mm and smaller pistol in my collection. Whether I’m running my AR-15 or AR-10 hard – even full-auto – or I’m on a spot-and-stalk hunt with a lightweight bolt-action rifle, or I’m plinking or varmint hunting with a rimfire rifle, or I’m shooting pistols and pistol caliber carbines in 9mm or smaller, this one suppressor can be configured so it’s ideally suited for each and every one of those things and more.

Heck, if I also owned a 45 ACP pistol and/or a 458 SOCOM rifle or a .45 cal lever action I could add 5x .45 cal LT and/or PRO Pistol baffles and have those guns covered, too!

  • 105 Series
  • LT base tube
  • Baffles:
    • 1x .22 cal HD Rimfire
    • 6x .22 cal LT Rimfire
    • 6x 9mm LT Pistol
    • LT Extension Tube
  • End Caps:
    • 1x .22 cal LT Flash Reducer
    • 1x 9mm LT Flash Reducer
  • Mounts:
    • 1x 1/2x28 Thread Mount

With this build I can suppress all of my rimfire rifles and pistols plus anything in 5.7x28mm. It’s also a Mission Configurable 9mm pistol and PCC suppressor that’s capable of being run in a full configuration for training on the shooting range and a short configuration for concealed carry. It’s so lightweight that it doesn’t need a booster!