12 gauge shotgun silencer
12 gauge shotgun silencer

JK 195 CHOKE END CAPS

$99.00

Our patented Choke Cap technology makes the JK 195 series of 12 gauge suppressors the first and only shotgun suppressors on the market that correctly and variably shape your shot pattern to suit your use! They’re the only shotgun suppressors that won’t hold you back when a tight shot pattern is required, such as with skeet, trap, and bird hunting.

SKU: N/A Category:
  • Specs
  • Features

Features

Our patented Choke Cap technology makes the JK 195 series of 12 gauge suppressors the first and only shotgun suppressors on the market that correctly and variably shape your shot pattern to suit your use! They’re the only shotgun suppressors that won’t hold you back when a tight shot pattern is required, such as with skeet, trap, and bird hunting.

12 gauge shotgun silencer

Easily swapped in seconds with no specialized tools required, JK 195 Choke Caps are available in Cylinder bore (included with all JK 195 suppressors), Improved Cylinder, Modified, and Full shot pattern restriction levels.

* The choke system for controlling shot pattern is located in the end cap of the 195 series of 12 gauge suppressors. The VERSAX 12GA and 195 SGX 12GA ship with a cylinder bore Choke Cap. The 195 SBSX BREACHER 12GA ships with a high flow, flash hider choke cap designed for law enforcement and military breaching use, available HERE.

 

* Full choke is for lead birdshot only (NO STEEL, BUCKSHOT or SLUGS)

Specs

Spec NameSpec Value
Diameter: 1.95"
Material: T6-7075 Billet Aluminum
Coating: Type 3 Hard Anodize
Improved Cylinder: .711
Modified: .705
Full: .685

UNLIMITED, UNCONDITIONAL, LIFETIME WARRANTY

Pride and quality workmanship goes into all of our American-made, JK products, and we stand behind them! WE GUARANTEE OUR PRODUCTS
FOR LIFE!

There are no reviews yet. Be the first one to write one.

Age Verification

DUE TO INCREASED STATE LEGISLATION AROUND FIREARMS, YOU MUST BE 18 TO ACCESS OUR SITE.

ARE YOU AT LEAST 18 YEARS OLD?

Example Build 1
Example Build 2
  • 155 Series
  • HD base tube
  • Baffles:
    • 1x .30 cal HD Rifle
    • 4x .30 cal PRO Rifle
    • 5x 9mm LT Pistol
  • LT Extension Tube
  • End Caps:
    • 1x .22 cal LT Flash Hider
    • 1x .30 cal LT Compensator
    • 1x 9mm LT Flash Reducer
  • Mounts:
    • 1x PRO QA Taper Mount
    • 1x 1/2x28 Thread Mount
    • 1x 5/8x24 Thread Mount
    • 2x .22 cal Bald Eagle
    • 2x .30 cal Bald Eagle
    • 1x 9mm Bald Eagle
    • 1x 1/2x28 Pistol Booster

With this build I can suppress every .30 caliber and smaller rifle and every 9mm and smaller pistol in my collection. Whether I’m running my AR-15 or AR-10 hard – even full-auto – or I’m on a spot-and-stalk hunt with a lightweight bolt-action rifle, or I’m plinking or varmint hunting with a rimfire rifle, or I’m shooting pistols and pistol caliber carbines in 9mm or smaller, this one suppressor can be configured so it’s ideally suited for each and every one of those things and more.

Heck, if I also owned a 45 ACP pistol and/or a 458 SOCOM rifle or a .45 cal lever action I could add 5x .45 cal LT and/or PRO Pistol baffles and have those guns covered, too!

  • 105 Series
  • LT base tube
  • Baffles:
    • 1x .22 cal HD Rimfire
    • 6x .22 cal LT Rimfire
    • 6x 9mm LT Pistol
    • LT Extension Tube
  • End Caps:
    • 1x .22 cal LT Flash Reducer
    • 1x 9mm LT Flash Reducer
  • Mounts:
    • 1x 1/2x28 Thread Mount

With this build I can suppress all of my rimfire rifles and pistols plus anything in 5.7x28mm. It’s also a Mission Configurable 9mm pistol and PCC suppressor that’s capable of being run in a full configuration for training on the shooting range and a short configuration for concealed carry. It’s so lightweight that it doesn’t need a booster!