JK 155 VSX™

$119.00

SKU: N/A Category:
Specs

Cup Profile:

Rifle: 60 Degree. Recommended for high-pressure rifle calibers.

Pistol: Radial. Recommended for low pressure (generally straight-walled cartridges).


Materials available:

LT - 7075 Billet Aluminum

HD - 17-4 Stainless Steel

PRO - Ti-6AL-4V (Grade 5) Titanium


Material Coatings

LT - Type 3 Hard Anodize

HD - Armor Black C-192 Cerakote

PRO - Armor Black C-192 Cerakote


Individual component specs:

LT Tube: 1.8oz. 1.55" OD. Length 2.5".

HD Tube: 3.7oz. 1.55" OD. Length2.5".

PRO Tube: 2.2oz. 1.55" OD. Length 2.5".

LT Rifle Baffle: 1oz. Adds .650" to OAL.

HD Rifle Baffle: 2.3oz. Adds .650" to OAL.

PRO Rifle Baffle: 1.5oz. Adds .650" to OAL.

LT Pistol Baffle: 1oz. Adds .650" to OAL.

PRO Pistol Baffle: 1.5oz. Adds .650" to OAL.

LT Extension Tube / Tone Tuner: 0.7 oz. Adds .650" to OAL.

HD Extension Tube / Tone Tuner: 2.4oz. Adds .650" to OAL.

PRO Extension Tube / Tone Tuner: 1.3oz. Adds .650" to OAL.

LT Taper Mount: 1.1oz. Adds .600" to OAL

PRO Taper Mount 1.3oz. Adds .600" to OAL

Direct Thread Mount: 2.1oz.

UNLIMITED, UNCONDITIONAL, LIFETIME WARRANTY

Pride and quality workmanship goes into all of our American-made, JK products, and we stand behind them! WE GUARANTEE OUR PRODUCTS
FOR LIFE!

*For more information please see our product manual.*

Product Description
Specs
Manual/Warranty

Step 1) The base tube configuration is LT – LT – 7075 Billet Aluminum. For heavy-duty use especially on SBR length firearms and high rights of fire, we recommend upgrading to an HD – 17-4 Stainless Steel or PRO – Ti-6AL-4V (Grade 5) Titanium tube (this is your serialized part!).

*HD tubes are not recommended for use on tilt-barreled handguns due to the added weight.

Step 2) Select your baffles! We offer two baffle profiles, Rifle, and Pistol. Rifle baffles have a 60degree profile and are best suited for high-pressure rifle calibers. These can accommodate up to a .375 (9mm) caliber bore aperture. Pistol caliber baffles are radial in profile and are best suited for low pressure (generally straight-walled cartridges). These can accommodate up to a .50cal bore aperture.

*We recommend adding at least 2 baffles and no more than 10. Adding additional baffles can increase the likelihood of a baffle strike.

Step 3) Select an extension tube if needed. These are for adding volume to your suppressor and or for added space within the main tube chamber to accommodate longer muzzle devices.

Step 4) Select an end cap. We have three models available, Flash Reducing, Compensator, and Flash hider.

*Please note the Flash Hider End Caps can only accommodate up to a 9mm caliber bore aperture due to the flash hiding forks.

Step 5) Select a mount if needed. Our 155 series tubes are threaded 1.375-24. We have taper mount options that are compatible with our War Eagle muzzle devices and or direct thread options available.

*Custom shop VSX suppressors are made to order. Expect a 1-3 weeks lead time for delivery to your dealer.

 

Cup Profile:

Rifle: 60 Degree. Recommended for high-pressure rifle calibers.

Pistol: Radial. Recommended for low pressure (generally straight-walled cartridges).


Materials available:

LT - 7075 Billet Aluminum

HD - 17-4 Stainless Steel

PRO - Ti-6AL-4V (Grade 5) Titanium


Material Coatings

LT - Type 3 Hard Anodize

HD - Armor Black C-192 Cerakote

PRO - Armor Black C-192 Cerakote


Individual component specs:

LT Tube: 1.8oz. 1.55" OD. Length 2.5".

HD Tube: 3.7oz. 1.55" OD. Length2.5".

PRO Tube: 2.2oz. 1.55" OD. Length 2.5".

LT Rifle Baffle: 1oz. Adds .650" to OAL.

HD Rifle Baffle: 2.3oz. Adds .650" to OAL.

PRO Rifle Baffle: 1.5oz. Adds .650" to OAL.

LT Pistol Baffle: 1oz. Adds .650" to OAL.

PRO Pistol Baffle: 1.5oz. Adds .650" to OAL.

LT Extension Tube / Tone Tuner: 0.7 oz. Adds .650" to OAL.

HD Extension Tube / Tone Tuner: 2.4oz. Adds .650" to OAL.

PRO Extension Tube / Tone Tuner: 1.3oz. Adds .650" to OAL.

LT Taper Mount: 1.1oz. Adds .600" to OAL

PRO Taper Mount 1.3oz. Adds .600" to OAL

Direct Thread Mount: 2.1oz.

Reviews

Be the first to review “JK 155 VSX™”

Your email address will not be published. Required fields are marked *

Age Verification

DUE TO INCREASED STATE LEGISLATION AROUND FIREARMS, YOU MUST BE 18 TO ACCESS OUR SITE.

ARE YOU AT LEAST 18 YEARS OLD?

Example Build 1
Example Build 2
  • 155 Series
  • HD base tube
  • Baffles:
    • 1x .30 cal HD Rifle
    • 4x .30 cal PRO Rifle
    • 5x 9mm LT Pistol
  • LT Extension Tube
  • End Caps:
    • 1x .22 cal LT Flash Hider
    • 1x .30 cal LT Compensator
    • 1x 9mm LT Flash Reducer
  • Mounts:
    • 1x PRO QA Taper Mount
    • 1x 1/2x28 Thread Mount
    • 1x 5/8x24 Thread Mount
    • 2x .22 cal Bald Eagle
    • 2x .30 cal Bald Eagle
    • 1x 9mm Bald Eagle
    • 1x 1/2x28 Pistol Booster

With this build I can suppress every .30 caliber and smaller rifle and every 9mm and smaller pistol in my collection. Whether I’m running my AR-15 or AR-10 hard – even full-auto – or I’m on a spot-and-stalk hunt with a lightweight bolt-action rifle, or I’m plinking or varmint hunting with a rimfire rifle, or I’m shooting pistols and pistol caliber carbines in 9mm or smaller, this one suppressor can be configured so it’s ideally suited for each and every one of those things and more.

Heck, if I also owned a 45 ACP pistol and/or a 458 SOCOM rifle or a .45 cal lever action I could add 5x .45 cal LT and/or PRO Pistol baffles and have those guns covered, too!

  • 105 Series
  • LT base tube
  • Baffles:
    • 1x .22 cal HD Rimfire
    • 6x .22 cal LT Rimfire
    • 6x 9mm LT Pistol
    • LT Extension Tube
  • End Caps:
    • 1x .22 cal LT Flash Reducer
    • 1x 9mm LT Flash Reducer
  • Mounts:
    • 1x 1/2x28 Thread Mount

With this build I can suppress all of my rimfire rifles and pistols plus anything in 5.7x28mm. It’s also a Mission Configurable 9mm pistol and PCC suppressor that’s capable of being run in a full configuration for training on the shooting range and a short configuration for concealed carry. It’s so lightweight that it doesn’t need a booster!