Bolt Action Rifle Barrel Threading

Starting at $179.00

We now offer barrel threading service for your favorite bolt action rifles, from tactical to hunting to long-range precision! Select from the options below to customize the threading service to your needs.

Please scroll down to the Features section for important information on how to prepare your barrel for shipment to us and a list of restrictions, notes, and other info.

Category:

Features

Please send us only your barrel or your stripped barreled action. If you aren’t able to send us just the barrel itself, this means removing the barreled action from the stock/chassis, removing the bolt, and removing all accessories such as optics and optics mounts/bases, triggers, internal magazines, etc. If you are unable to remove any components from the barreled action yourself, our shop rate is $125 per hour and we will send you a quote for teardown and reassembly once we inspect your barreled action.

Note: most barreled actions can be threaded without us having to remove the barrel from the action. Some cannot. If yours must be disassembled in order to be threaded, we will contact you with a quote for this disassembly and reassembly work.

Warning: barreled actions with a trigger installed should be considered very fragile. Triggers break easily inside of shipping boxes and are hard to properly protect. If you are unable to remove your trigger before shipping, we recommend either shipping the barreled action still installed in the stock/chassis in order to protect the trigger, or inserting the trigger into a block of styrofoam (or similar) then taping the foam block in place. Regardless, ensure that your barreled action is securely padded inside of a quality shipping box, including extra padding at the muzzle, tang, and trigger areas.

Standard thread pitch for 223/5.56mm, 9mm, and 22 LR is 1/2×28. At the muzzle area, your barrel must be at least 0.560” in diameter for 1/2×28 threads.

Standard thread pitch for effectively all rifle cartridges larger than .223/5.56mm (i.e. .243/6mm on up) through .375 cal is 5/8×24. At the muzzle area, your barrel must be at least 0.685” in diameter for 1/2×28 threads.

For .375 caliber and larger, there is less of a standard for thread pitch. We typically recommend 11/16×24, but we can do other sizes on request. You’ll want at least a 0.750” diameter barrel at the muzzle area for 11/16×24 threads, and 0.810” for 3/4×24 threads.

We can shorten your barrel prior to threading it. The NFA defines a short-barreled rifle as any rifle with a barrel less than 16 inches long. If we are cutting your barrel to a length shorter than 16 inches you must already have an approved ATF Form 1 to turn your rifle into an SBR.

After threading, marks will be visible from the machining process. We can Cerakote or blue your barrel after threading as an optional service.

Expect a 3-6 week turnaround time for custom shop services.

Please securely and safely package your barrel with sufficient padding in an appropriate box, and ship it to the address below with a printout of your completed order.

CCX/RFX hybrid build. Two suppressors, one stamp!

  • LT Main Tube
  • LT Tone Tuner
  • .22 cal HD Rimfire baffle
  • (5x) .22 cal LT Rimfire baffles
  • (5x) 9mm LT Pistol baffles
  • .22 cal LT End Cap
  • 9mm LT End Cap
  • 1/2x28 CCX Pistol Thread Mount
  • 5/8x24 CCX Lever Gun Thread Mount (if you own a lever action gun threaded 5/8x24 in a CCX-compatible caliber such as .38/.357)

With the CCX/RFX build you can suppress all of your rimfire rifles and pistols plus anything in 5.7x28mm. It’s also a Mission Configurable 9mm pistol, PCC, and lever gun suppressor that’s capable of being run in a full configuration for training on the shooting range and a short configuration for concealed carry. It’s so lightweight that it doesn’t need a booster on the vast majority of 9mm pistols!

Short, minimalist rimfire rifle build:

  • LT Main Tube
  • (4x) .22 cal LT Rimfire baffles
  • .22 cal LT End Cap
  • 1/2x28 RFX Rifle Thread Mount

A 22 LR rifle or carbine with a 16-inch or longer barrel doesn’t leave a lot of work for the suppressor to do, so you don’t need many baffles to achieve impressively quiet performance! With the minimalist rimfire rifle build length, weight, and cost are reduced to the lowest levels possible, while still achieving Hollywood quiet plinking performance from rifle-length barrels.

CCX long for centerfire lever action rifles:

  • LT Main Tube
  • LT Tone Tuner
  • (8x) 9mm LT Pistol baffles
  • 9mm LT End Cap
  • 1/2x28 RFX Thread Mount and/or 5/8x24 CCX Lever Gun Thread Mount depending on your rifle’s thread size

Designed for use on lever action rifles and carbines chambered in .38/.357 caliber and smaller, the CCX long build optimizes suppression performance on revolver/lever gun cartridges with its Tone Tuner and eight baffles.

Age Verification

DUE TO INCREASED STATE LEGISLATION AROUND FIREARMS, YOU MUST BE 21 TO ACCESS OUR SITE.

ARE YOU AT LEAST 21 YEARS OLD?

Example Build 1
Example Build 2
  • 155 Series
  • HD base tube
  • Baffles:
    • 1x .30 cal HD Rifle
    • 4x .30 cal PRO Rifle
    • 5x 9mm LT Pistol
  • LT Extension Tube
  • End Caps:
    • 1x .22 cal LT Flash Hider
    • 1x .30 cal LT Compensator
    • 1x 9mm LT Flash Reducer
  • Mounts:
    • 1x PRO QA Taper Mount
    • 1x 1/2x28 Thread Mount
    • 1x 5/8x24 Thread Mount
    • 2x .22 cal Bald Eagle
    • 2x .30 cal Bald Eagle
    • 1x 9mm Bald Eagle
    • 1x 1/2x28 Pistol Booster

With this build I can suppress every .30 caliber and smaller rifle and every 9mm and smaller pistol in my collection. Whether I’m running my AR-15 or AR-10 hard – even full-auto – or I’m on a spot-and-stalk hunt with a lightweight bolt-action rifle, or I’m plinking or varmint hunting with a rimfire rifle, or I’m shooting pistols and pistol caliber carbines in 9mm or smaller, this one suppressor can be configured so it’s ideally suited for each and every one of those things and more.

Heck, if I also owned a 45 ACP pistol and/or a 458 SOCOM rifle or a .45 cal lever action I could add 5x .45 cal LT and/or PRO Pistol baffles and have those guns covered, too!

  • 105 Series
  • LT base tube
  • Baffles:
    • 1x .22 cal HD Rimfire
    • 6x .22 cal LT Rimfire
    • 6x 9mm LT Pistol
    • LT Extension Tube
  • End Caps:
    • 1x .22 cal LT Flash Reducer
    • 1x 9mm LT Flash Reducer
  • Mounts:
    • 1x 1/2x28 Thread Mount

With this build I can suppress all of my rimfire rifles and pistols plus anything in 5.7x28mm. It’s also a Mission Configurable 9mm pistol and PCC suppressor that’s capable of being run in a full configuration for training on the shooting range and a short configuration for concealed carry. It’s so lightweight that it doesn’t need a booster!