Have a Question? Give Us a Call (208) 419-3770
Have a Question? Give Us a Call (208) 419-3770
Login

Cart

Add our qualifying hat to unlock FREE Shipping. Add Hat

CCX/RFX hybrid build. Two suppressors, one stamp!

  • LT Main Tube
  • LT Tone Tuner
  • .22 cal HD Rimfire baffle
  • (5x) .22 cal LT Rimfire baffles
  • (5x) 9mm LT Pistol baffles
  • .22 cal LT End Cap
  • 9mm LT End Cap
  • 1/2x28 CCX Pistol Thread Mount
  • 5/8x24 CCX Lever Gun Thread Mount (if you own a lever action gun threaded 5/8x24 in a CCX-compatible caliber such as .38/.357)

With the CCX/RFX build you can suppress all of your rimfire rifles and pistols plus anything in 5.7x28mm. It’s also a Mission Configurable 9mm pistol, PCC, and lever gun suppressor that’s capable of being run in a full configuration for training on the shooting range and a short configuration for concealed carry. It’s so lightweight that it doesn’t need a booster on the vast majority of 9mm pistols!

Short, minimalist rimfire rifle build:

  • LT Main Tube
  • (4x) .22 cal LT Rimfire baffles
  • .22 cal LT End Cap
  • 1/2x28 RFX Rifle Thread Mount

A 22 LR rifle or carbine with a 16-inch or longer barrel doesn’t leave a lot of work for the suppressor to do, so you don’t need many baffles to achieve impressively quiet performance! With the minimalist rimfire rifle build length, weight, and cost are reduced to the lowest levels possible, while still achieving Hollywood quiet plinking performance from rifle-length barrels.

CCX long for centerfire lever action rifles:

  • LT Main Tube
  • LT Tone Tuner
  • (8x) 9mm LT Pistol baffles
  • 9mm LT End Cap
  • 1/2x28 RFX Thread Mount and/or 5/8x24 CCX Lever Gun Thread Mount depending on your rifle’s thread size

Designed for use on lever action rifles and carbines chambered in .38/.357 caliber and smaller, the CCX long build optimizes suppression performance on revolver/lever gun cartridges with its Tone Tuner and eight baffles.

Example Build 1
Example Build 2
  • 155 Series
  • HD base tube
  • Baffles:
    • 1x .30 cal HD Rifle
    • 4x .30 cal PRO Rifle
    • 5x 9mm LT Pistol
  • LT Extension Tube
  • End Caps:
    • 1x .22 cal LT Flash Hider
    • 1x .30 cal LT Compensator
    • 1x 9mm LT Flash Reducer
  • Mounts:
    • 1x PRO QA Taper Mount
    • 1x 1/2x28 Thread Mount
    • 1x 5/8x24 Thread Mount
    • 2x .22 cal Bald Eagle
    • 2x .30 cal Bald Eagle
    • 1x 9mm Bald Eagle
    • 1x 1/2x28 Pistol Booster

With this build I can suppress every .30 caliber and smaller rifle and every 9mm and smaller pistol in my collection. Whether I’m running my AR-15 or AR-10 hard – even full-auto – or I’m on a spot-and-stalk hunt with a lightweight bolt-action rifle, or I’m plinking or varmint hunting with a rimfire rifle, or I’m shooting pistols and pistol caliber carbines in 9mm or smaller, this one suppressor can be configured so it’s ideally suited for each and every one of those things and more.

Heck, if I also owned a 45 ACP pistol and/or a 458 SOCOM rifle or a .45 cal lever action I could add 5x .45 cal LT and/or PRO Pistol baffles and have those guns covered, too!

  • 105 Series
  • LT base tube
  • Baffles:
    • 1x .22 cal HD Rimfire
    • 6x .22 cal LT Rimfire
    • 6x 9mm LT Pistol
    • LT Extension Tube
  • End Caps:
    • 1x .22 cal LT Flash Reducer
    • 1x 9mm LT Flash Reducer
  • Mounts:
    • 1x 1/2x28 Thread Mount

With this build I can suppress all of my rimfire rifles and pistols plus anything in 5.7x28mm. It’s also a Mission Configurable 9mm pistol and PCC suppressor that’s capable of being run in a full configuration for training on the shooting range and a short configuration for concealed carry. It’s so lightweight that it doesn’t need a booster!